Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 950.xx — Lexmark CX725dthe

Code: 950.xx

Description: There is a mismatch between controller EEPROM and mirror. • 950.00 through 950.29 codes: mismatch between controller and mirror • 950.30 through 950.60 codes: mismatch between secure and controller
Remedy: Step 1 Verify if the control panel has been replaced. Has the control panel been replaced? Go to step 2. Go to step 3. Step 2 Replace the control panel with a new, and not previously installed, UICC card. See “Control panel removal”. Does the problem remain? Go to step 3. The problem is solved. Step 3 Verify if the controller board has been replaced. Has the controller board been replaced? Go to step 4. Go to step 5. Step 4 Replace the controller board with a new, and not previously installed, controller board. See “Controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Turn the printer off for ten or more seconds. b Turn the printer back on. Does the problem remain? Go to step 6. The problem is solved. Step 6 Clear the NVRAM of the printer: a Turn the printer off. b With the printer off, press and hold buttons 6, 7, and 8 on the keypad. c Turn the printer on. d When Restoring Factory Defaults appears, release the buttons. Note: If the printer looks up on the Restoring Factory Defaults, then wait two minutes, and then turn the printer off. After ten seconds or more, turn the printer back on without holding down any buttons. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the control panel. See “Control panel removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CX725dthe

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie