Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 363.60, 363.61 — Lexmark CX825

Code: 363.60, 363.61

Description: 363.60 The motor (staging inner transport) did not turn on. 363.61 The motor (staging inner transport) did not turn off.
Remedy: Step 1 a Check the MSHPF for proper installation, and then check its paper path. See “Procedure before starting the MSHPF service checks”. b Enter the Diagnostics menu, select Output bin quick feed > select bin, and then touch Single or Continuous. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Motor tests > Finisher > Staging, outer and inner transport b Touch Start. Does the motor run? Go to step 5. Go to step 3. Step 3 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 5. Go to step 4. Step 4 Reinstall or replace the motor. See “Motor (staging inner transport) removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the staging transport belts for misalignment and damage. Note: Make sure that there are no other parts interfering with the movement of the belts. Are the belts properly installed and free of damage? Go to step 7. Go to step 6. Step 6 Reinstall or replace the belt. See “Staging transport belts removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the staging transport gears for misalignment and damage. Are the gears properly installed and free of damage? Go to step 9. Go to step 8. Step 8 Reinstall or replace the gear. See “Staging transport gears removal”. Does the problem remain? Go to step 9. The problem is solved. Step 9 Check the pulley gears for misalignment and damage. Are the pulley gears properly installed and free of damage? Go to step 11. Go to step 10. Step 10 Reinstall or replace the pulley gear. Does the problem remain? Go to step 11. The problem is solved. Step 11 Check the staging outer transport rollers for contamination, wear, and damage. Are the rollers free of damage? Go to step 12. Go to step 13. Step 12 Check the rollers for misalignment. Are the rollers properly installed? Go to step 14. Go to step 13. Step 13 Reinstall or replace the roller. Does the problem remain? Go to step 14. The problem is solved. Step 14 Check the mid.transport interface board cables. . Reseat all connectors on the interface board. . Make sure that the cables are properly routed. Does the problem remain? Go to step 15. The problem is solved. Step 15 Replace the interface board. See gMid-transport interface board removalh5. Does the problem remain? Go to step 16. The problem is solved. Step 16 Check the interface board cables for cuts and damage. Are the cables free of damage? Go to step 18. Go to step 17. Step 17 Replace the cable. Does the problem remain? Go to step 18. The problem is solved. Step 18 a Reseat all connectors on the MSHPF controller board. b Make sure that the cables are properly routed, and then reset the printer. Does the problem remain? Go to step 19. The problem is solved. Step 19 Replace the MSHPF controller board. See “MSHPF controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CX825

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie