Remedy: Step 1 Navigate to Settings > Print settings > Utilities Menu > Format Flash > Yes. Does the problem remain? Go to step 3. Go to step 2. Step 2 Navigate to Settings > Print > Job Accounting > Log Near Full Level. Make sure that the value is set to maximum. Does the problem remain? Go to step 3. The problem is solved. Step 3 If applicable, make sure that the optional memory card is supported. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Make sure that the firmware version is the latest, and update if necessary. Does the problem remain? Contact the next level of support. The problem is solved.