Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 148.80...148.85 — Lexmark CX825de

Code: 148.80...148.85

Description: 148.80 The motor (duplex diverter) did not turn on. 148.81 The motor (duplex diverter) did not turn off. 148.82 The motor (duplex diverter) speed did not ramp up to the required level. 148.83 The motor (duplex diverter) stalled. 148.84 The motor (duplex diverter) ran too slow. 148.85 The motor (duplex diverter) ran too fast.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the controller board socket JMTR1 connection. Is the cable properly connected? Go to step 4. Go to step 3. Step 3 Reseat the cable. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the motor (duplex diverter) connection. Is the motor properly connected? Go to step 6. Go to step 5. Step 5 Reseat the cable. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the motor (duplex diverter) cable for damage. Is the cable free of damage? Go to step 8. Go to step 7. Step 7 Replace the cable. Does the problem remain? Go to step 8. The problem is solved. Step 8 Reset the printer. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the redrive. See “Redrive removal”. Does the problem remain? Go to step 10. The problem is solved. Step 10 Reset the printer. Does the problem remain? Go to step 11. The problem is solved. Step 11 Replace the controller board. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CX825de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie