Description: 230.02 Paper fed from the MPF was detected earlier than expected at the sensor (duplex path 1). 230.12 Paper fed from tray 1 was detected earlier than expected at the sensor (duplex path 1). 230.22 Paper fed from tray 2 was detected earlier than expected at the sensor (duplex path 1). 230.32 Paper fed from tray 3 was detected earlier than expected at the sensor (duplex path 1). 230.42 Paper fed from tray 4 was detected earlier than expected at the sensor (duplex path 1). 230.52 Paper fed from tray 5 was detected earlier than expected at the sensor (duplex path 1).
Remedy: Step 1 Check the paper path for partially fed or jammed paper. Is the paper path free of partially fed or jammed paper? Go to step 3. Go to step 2. Step 2 Remove the partially fed or jammed paper. Does the problem remain? Go to step 3. The problem is solved. Step 3 a Enter the Diagnostics menu, and then navigate to: Printer diagnostics & adjustments > Sensor tests b Find the sensor (Redrive buckle). Does the sensor status change while toggling the sensor? Go to step 6. Go to step 4. Step 4 Check the sensor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the sensor. Does the problem remain? Go to step 6. The problem is solved. Step 6 Perform a print job. Does the problem remain? Contact the next level of support. The problem is solved.