Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 415.33, 415.35 — Lexmark CX825de

Code: 415.33, 415.35

Description: 415.33 The diverter did not reach the sensor (mailbox diverter home). 415.35 The diverter never cleared the sensor (mailbox diverter home).
Remedy: Step 1 a Check the mailbox for proper installation, and then check its paper path. See “Procedure before starting the mailbox service checks”. b Enter the Diagnostics menu, select Output bin quick feed > select bin, and then touch Single or Continuous. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the mailbox jam door and its rollers for misalignment and damage. Is the door properly installed and free of damage? Go to step 4. Go to step 3. Step 3 Reinstall or replace the mailbox jam door. See “Mailbox jam door removal”4. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the mailbox diverters and bottom diverter spring for misalignment and damage. Are the diverters properly installed and free of damage? Go to step 6. Go to step 5. Step 5 Reinstall or replace the mailbox diverters. See “Mailbox diverter removal”6. Does the problem remain? Go to step 6. The problem is solved. Step 6 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Sensor tests > Mailbox b Find the sensor (Diverter). Does the sensor status change while toggling the sensor? Go to step 9. Go to step 7. Step 7 Reseat the sensor cable, and then check the sensor for misalignment and damage. Is the sensor properly installed and free of damage? Go to step 9. Go to step 8. Step 8 Reinstall or replace the sensor. See “Sensor (mailbox diverter home) removal”5. Does the problem remain? Go to step 9. The problem is solved. Step 9 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Motor tests > Mailbox > Mailbox position diverter b Touch Start. Does the motor run? Go to step 12. Go to step 10. Step 10 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 12. Go to step 11. Step 11 Reinstall or replace the motor. See “Motor (mailbox diverter) removal”5. Does the problem remain? Go to step 12. The problem is solved. Step 12 Check the mailbox diverter gear for misalignment and damage. Is the gear properly installed and free of damage? Go to step 14. Go to step 13. Step 13 Reinstall or replace the mailbox diverter gear. See “Mailbox diverter gear removal”7. Does the problem remain? Go to step 14. The problem is solved. Action Yes No Step 14 Check the mailbox interface cable: • Check the connectors and its pins for damage. • Check the cable for cuts and exposed wires. Is the cable free of damage? Go to step 16. Go to step 15. Step 15 Replace the mailbox interface cable. See “Mailbox interface cable removal”0. Does the problem remain? Go to step 16. The problem is solved. Step 16 Reseat all connectors on the mailbox controller board, and then reset the printer. Does the problem remain? Go to step 17. The problem is solved. Step 17 Replace the mailbox controller board. See “Mailbox controller board removal”7. Does the problem remain? Go to step 18. The problem is solved. Step 18 Replace the mailbox. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CX825de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie