Description: The parallel port, serial port, or standard USB port is disabled.
Remedy: Step 1 a Make sure that the cables connected to ports are properly installed. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Network/Ports menu and make sure that the applicable port settings are enabled. Does the problem remain? Go to step 3. The problem is solved. Step 3 If applicable, make sure that the option card is supported. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Make sure that the firmware version is the latest, and update if necessary. Does the problem remain? Contact the next level of support. The problem is solved.