Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 282.13 — Lexmark CX825dtfe

Code: 282.13

Description: Paper never arrived at the sensor (ADF exit).
Remedy: Step 1 Check the original document: • Check the document for contaminations such as pieces of tape, paper clips, and staples. • Check the document for damage such as creases, tears, holes, and excess wear. Is the original document free of contaminations and damage? Go to step 3. Go to step 2. Step 2 a Remove the contaminations or replace the damaged original document. b Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Scanner quick feed Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the ADF paper path for paper fragments and contaminations such as pieces of tape, paper clips, and staples. Is the paper path free of obstructions and contaminations? Go to step 5. Go to step 4. Step 4 Remove the obstructions and contaminations. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the condition of the ADF pick roller. Is the pick roller free from excess wear, contamination, and damage? Go to step 7. Go to step 6. Step 6 Clean or replace the pick roller. See “ADF pick roller removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the condition of the ADF feed belt. Is the feed belt free from excess wear, contamination, and damage? Go to step 9. Go to step 8. Step 8 Clean or replace the feed belt. See “ADF feed belt removal”. Does the problem remain? Go to step 9. The problem is solved. Step 9 Check the condition of the ADF separator roller. Is the separator roller free from excess wear, contamination, and damage? Go to step 11. Go to step 10. Step 10 Clean or replace the separator roller. See “ADF separator roller removal”. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Sensor tests b Find the sensor (ADF media exit). Does the sensor status change while toggling the sensor? Go to step 14. Go to step 12. Step 12 Check the sensor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 13. The problem is solved. Step 13 Replace the sensor. Does the problem remain? Go to step 14. The problem is solved. Step 14 a Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Motor tests > ADF transport b Touch Start. Does the motor run? Go to step 17. Go to step 15. Step 15 Check the motor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 16. The problem is solved. Step 16 Replace the motor. Does the problem remain? Go to step 17. The problem is solved. Step 17 Load an undamaged document into the ADF tray, and then perform a copy job. Does the problem remain? Go to step 18. The problem is solved. Step 18 Replace the ADF controller board. Does the problem remain? Contact the next level of support. The problem is solved

← Xem tất cả mã lỗi Lexmark CX825dtfe

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie