Description: 162.80 The motor (tray 2 pick) did not turn on. 162.81 The motor (tray 2 pick) did not turn off. 162.82 The motor (tray 2 pick) speed did not ramp up to the required level. 162.83 The motor (tray 2 pick) stalled. 162.84 The motor (tray 2 pick) ran too slow. 162.85 The motor (tray 2 pick) ran too fast.
Remedy: Step 1 Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the connections between the motor (tray 2 pick) and controller board. Is the motor properly connected? Go to step 4. Go to step 3. Step 3 Reseat the cable. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the motor (tray 2 pick) cable for damage. Is the cable free of damage? Go to step 6. Go to step 5. Step 5 Replace the cable. Does the problem remain? Go to step 6. The problem is solved. Step 6 Reset the printer. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the motor (tray 2 pick). Does the problem remain? Go to step 8. The problem is solved. Step 8 Reset the printer. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the controller board. See “550-sheet tray controller board removal” or “2200-sheet tray controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.