Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 417.31...417.35 — Lexmark CX860dte

Code: 417.31...417.35

Description: 417.31 Paper remains detected at the sensor (mailbox transport) after the printer is turned on. 417.33 Paper did not reach the sensor (mailbox transport). 417.35 Paper never cleared the sensor (mailbox transport).
Remedy: Step 1 a Check the mailbox for proper installation, and then check its paper path. See “Procedure before starting the mailbox service checks”. b Enter the Diagnostics menu, select Output bin quick feed > select bin, and then touch Single or Continuous. Does the problem remain? Go to step 2. The problem is solved. Step 2 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Sensor tests > Mailbox b Find the sensor (Transport). Does the sensor status change while toggling the sensor? Go to step 5. Go to step 3. Step 3 Reseat the sensor cable, and then check the sensor and its actuator for misalignment and damage. Is the sensor properly installed and free of damage? Go to step 5. Go to step 4. Step 4 Reinstall or replace the sensor. See “Sensor (mailbox transport) removal”8. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the mailbox jam door and its rollers for misalignment and damage. Is the door properly installed and free of damage? Go to step 7. Go to step 6. Step 6 Reinstall or replace the mailbox jam door. See “Mailbox jam door removal”4. Does the problem remain? Go to step 7. The problem is solved. Step 7 Check the mailbox diverters and bottom diverter spring for misalignment and damage. Are the diverters free of damage? Go to step 9. Go to step 8. Step 8 Reinstall or replace the mailbox diverters. See “Mailbox diverter removal”6. Does the problem remain? Go to step 9. The problem is solved. Step 9 Check the mailbox bin full sensor flags for misalignment and damage. Are the flags properly installed and free of damage? Go to step 11. Go to step 10. Step 10 Reinstall or replace the mailbox bin full sensor flags. See “Mailbox bin 1 full sensor flag removal”3 or “Mailbox bin 2 full sensor flag removal”1. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Enter the Diagnostics menu, and then navigate to: Output device diagnostics > Motor tests > Mailbox > Mailbox transport b Touch Start. Does the motor run? Go to step 14. Go to step 12. Step 12 Reseat the motor cable, and then check the motor for misalignment and damage. Is the motor properly installed and free of damage? Go to step 14. Go to step 13. Step 13 Reinstall or replace the motor. See “Motor (mailbox transport) removal”8. Does the problem remain? Go to step 14. The problem is solved. Step 14 Check the mailbox transport rollers for contamination, wear, and damage. Are the rollers free of damage? Go to step 15. Go to step 25. Step 15 Check the mailbox drive gears for misalignment and damage. Are the gears properly installed and free of damage? Go to step 17. Go to step 16. Step 16 Reinstall or replace the mailbox drive gears. See “Mailbox drive gears removal”3. Does the problem remain? Go to step 17. The problem is solved. Step 17 Check the mailbox pulley gears for misalignment and damage. Are the gears properly installed and free of damage? Go to step 19. Go to step 18. Step 18 Reinstall or replace the mailbox pulley gears. See “Mailbox bin 1 pulley gear removal”2 or “Mailbox bin 2 pulley gear removal”0. Does the problem remain? Go to step 19. The problem is solved. Step 19 Check the mailbox drive belts for misalignment and damage. Are the belts properly installed and free of damage? Go to step 21. Go to step 20. Step 20 Reinstall or replace the mailbox drive belts. See “Mailbox drive belt removal”1. Does the problem remain? Go to step 21. The problem is solved. Step 21 Check the mailbox interface cable: • Check the connectors and its pins for damage. • Check the cable for cuts and exposed wires. Is the cable free of damage? Go to step 23. Go to step 22. Step 22 Replace the mailbox interface cable. See “Mailbox interface cable removal”0. Does the problem remain? Go to step 23. The problem is solved. Step 23 Reseat all connectors on the mailbox controller board, and then reset the printer. Does the problem remain? Go to step 24. The problem is solved. Step 24 Replace the mailbox controller board. See “Mailbox controller board removal”7. Does the problem remain? Go to step 25. The problem is solved. Step 25 Replace the mailbox. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark CX860dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie