Description: Paper never cleared the sensor (ADF 1st scan).
Remedy: Step 1 Check the original document: • Check the document for contaminations such as pieces of tape, paper clips, and staples. • Check the document for damage such as creases, tears, holes, and excess wear. Is the original document free of contaminations and damage? Go to step 3. Go to step 2. Step 2 a Remove the contaminations or replace the damaged original document. b Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Scanner quick feed Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the ADF paper path for paper fragments and contaminations such as pieces of tape, paper clips, and staples. Is the paper path free of obstructions and contaminations? Go to step 5. Go to step 4. Step 4 Remove the obstructions and contaminations. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Sensor tests b Find the sensor (ADF 1st scan). Does the sensor status change while toggling the sensor? Go to step 8. Go to step 6. Step 6 Check the sensor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the sensor. Does the problem remain? Go to step 8. The problem is solved. Step 8 a Enter the Diagnostics menu, and then navigate to: Scanner diagnostics > Motor tests > ADF transport b Touch Start. Does the motor run? Go to step 11. Go to step 9. Step 9 Check the motor cable for proper connection, and then reseat if necessary. Does the problem remain? Go to step 10. The problem is solved.