Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 171.03...171.07 — Lexmark M1140

Code: 171.03...171.07

Description: Fuser fan error.
Remedy: Step 1 a Make sure that the cable JFAN1 is properly connected to the controller board. b Check if the cooling fan is rotating properly. Is it rotating properly? Go to step 2. Replace the cooling fan. See “Cooling fan removals”.
Step 2 a Turn off the printer, and disconnect JFAN1 from the controller board. b Turn on the printer, and measure the voltage across JFAN1. Is the voltage approximately 24 V? Go to step 3. Replace the controller board. See “Controller board removals”.
Step 3 Is the fan idle? Replace the cooling fan. See “Cooling fan removals”. The problem is solved.

← Xem tất cả mã lỗi Lexmark M1140

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie