Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 841.xx — Lexmark MS310d

Code: 841.xx

Description: Scanner failure—front side image processing ASIC. Invalid configuration or ASIC not found
Remedy: CCD service check
Step 1 Restart the device, and retry the scan / copy job. Repeat this step with a few copy jobs. Does the error return? Go to step 2. No issue.
Step 2 Is the CCD ribbon cable properly connected to JCIS1 on the controller board? Go to step 3. Properly connect cable to JCIS1.
Step 3 Replace the flatbed unit. See “Flatbed assembly removal”. Did this resolve the issue? The problem is solved. Replace the controller board. See “Controller board removal”.
Flatbed home position service check
Step 1 POR the MFP. Does the CCD move and return to the home position? The problem is solved. Go to step 2.
Step 2 Perform the home position sensor test. See “Scanner tests”. Is the sensor working properly? Go to step 3. Go to step 5.
Step 3 Check JFBM1 on the controller for proper connection. Is it connected properly? Go to step 4. Properly connect the cable.
Step 4 Check pin 1 in JFBM1 for voltage. The voltage is only present when a flatbed copy job is running. The voltage should measure +24V AC. Is voltage present? Go to step 5. Replace the controller board. See “Controller board removal”.
Step 5 Ensure that the home position cable (JHOME1) is connected. Is the cable connected? Go to step 6. Properly connect the cable.
Step 6 Check pin 1 in JHOME1 for voltage. The voltage should measure +5V DC. Pin 2 should be GND. Is voltage present and is it correct? Replace the flatbed. See “Flatbed assembly removal”. Replace the controller board. See “Controller board removal”.

← Xem tất cả mã lỗi Lexmark MS310d

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie