Code: 31.60...31.65
Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet timeout 31.62 Imaging unit I2C packet has been sent but code timedout on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.64 Imaging unit ROM signature error 31.65 Imaging unit stuck busy (status register and/or CRI Arbiter register report busy)
Remedy: 1 Make sure that the imaging unit is properly installed. 2 Check if the imaging unit is supported. Replace with a supported imaging unit if necessary
Step 1 Check the cable JARW2 for proper connection to the controller board. Is it properly connected? Go to step 2. Reseat the cables.
Step 2 Check the imaging unit smart chip contact for damaged pins. Is it free of damage? Replace the controller board. See “Controller board removals”. Replace the printer.
Step 1 Check the cable JARW2 for proper connection to the controller board. Is it properly connected? Go to step 2. Reseat the cables.
Step 2 Check the imaging unit smart chip contact for damaged pins. Is it free of damage? Replace the controller board. See “Controller board removals”. Replace the printer.