Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 200.01 — Lexmark MS312dn

Code: 200.01

Description: Input sensor covered during warm-up sequence.
Remedy: Step 1 Check the input sensor area for jammed media fragments. Is the paper path free of partially fed or jammed media? Go to step 2. Clear the paper path of any media fragments.
Step 2 Check the jam access cover if it is blocking the input sensor. Is it blocking the input sensor? Replace the jam access cover. See “Jam access cover removal”. Go to step 3.
Step 3 Check the input sensor cable for proper connection. Is it properly connected? Go to step 4. Reseat the cable.
Step 4 POR into the Diagnostics menu and perform a sensor test: Diagnostics Menu > Base Sensor Test > Input. Does the sensor state on the control panel display change when it is toggled? Go to step 5. Replace the input sensor. See “Duplex sensor and input sensor removal”
Step 5 Does the error remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark MS312dn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie