Code: 9500
Description: When printing from paper tray 2, the T2 paper feed sensor detected that there was no paper set in paper tray 2.
Causes: 1 Connection failure of the T2 paper feed sensor harness. 2 T2 paper feed actuator caught in some sections of the machine. 3 T2 paper feed actuator failure. 4 T2 paper feed sensor failure. 5 T2 relay PCB failure. 6 LT connector failure. 7 Main PCB failure.
Remedy: 1 Connection failure of the T2 paper feed sensor harness Check the connection of the T2 paper feed sensor harness, and reconnect it if necessary. 2 T2 paper feed actuator caught in some sections of the machine Reattach the T2 paper feed actuator. 3 T2 paper feed actuator failure Replace the T2 paper feed actuator. 4 T2 paper feed sensor failure Refer to "1.3.10 Check sensor operation (function code: 32)" in Chapter 5 to check the sensor operation. If the sensor operation is faulty, replace the T2 paper feed sensor PCB ASSY. 5 T2 relay PCB failure Replace the T2 relay PCB ASSY. 6 LT connector failure Replace the LT connector 7 Main PCB failure Replace the main PCB ASSY.