Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 295.20 — Lexmark MS710dn

Code: 295.20

Description: Sensor (multifeed detect) detected more than one page in the path at a time.
Remedy: Step 1 Check the original document condition. Is the original document free of paper clips and staples as well as damage such as creases, tears, holes or excessive wear? Go to step 2. Remove damaged original document and replace with a new undamaged original document. Perform an ADF test. If the problem remains, go to step 2. Step 2 Check the media path for contaminates. Is the media path free of excess media dust and foreign objects such as paper clips and staples? Go to step 3. Remove all contaminates from the media path. Step 3 Check the ADF feed belt for wear or gear damage. Is the ADF feed belt assembly free of excess wear or gear damage? Go to step 4. Clean or replace the ADF feed belt. Go to “ADF feed belt removal”. Step 4 Check for correct installation of the torque limiting clutch and separator roller. Are the above components properly installed? Go to step 5. Reinstall the torque limiting clutch and separator roller. Step 5 Check the ADF separator roller for wear. Is the ADF separator roller assembly free of excess wear? Go to step 6. Problem solved. Step 6 Perform an ADF test. Does the problem remain? Replace the sensor (multifeed detect). See “Multifeed sensor parts kit removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark MS710dn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie