Code: 200.13
Description: The page at the sensor (input) is not the next page to be imaged.
Remedy: Step 1 Check the appropriate media tray sensor (pass through) in the appropriate input option for proper operation. a Enter the diagnostic mode. b Select Input tray tests. c Select Sensor test. d Select the appropriate input tray. Observe the line item “pass through” for the appropriate media tray. Does the display on the control panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 3. Go to step 2. S
tep 2 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (pass through). See “Sensor (drawer pass through) removal ”. Reseat the connection.
Step 3 Perform a print test using the appropriate input tray. Does the error continue? Replace the input option. Problem solved. 7463 Diagnostic information 64
tep 2 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (pass through). See “Sensor (drawer pass through) removal ”. Reseat the connection.
Step 3 Perform a print test using the appropriate input tray. Does the error continue? Replace the input option. Problem solved. 7463 Diagnostic information 64