Code: 295.20
Description: Sensor (multifeed detect) detected more than one page in the path at a time.
Remedy: Step 1 Check the original document condition. Is the original document free of paper clips and staples as well as damage such as creases, tears, holes or excessive wear? Go to step 2. Remove damaged original document and replace with a new undamaged original document. Perform an ADF test. If the problem remains, go to step 2. Step 2 Check the media path for contaminates. Is the media path free of excess media dust and foreign objects such as paper clips and staples? Go to step 3. Remove all contaminates from the media path. Step 3 Check the ADF feed belt for wear or gear damage. Is the ADF feed belt assembly free of excess wear or gear damage? Go to step 4. Clean or replace the ADF feed belt. Go to “ADF feed belt removal”. Step 4 Check for correct installation of the torque limiting clutch and separator roller. Are the above components properly installed? Go to step 5. Reinstall the torque limiting clutch and separator roller. Step 5 Check the ADF separator roller for wear. Is the ADF separator roller assembly free of excess wear? Go to step 6. Problem solved. Step 6 Perform an ADF test. Does the problem remain? Replace the sensor (multifeed detect). See “Multifeed sensor parts kit removal”. Problem solved.