Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 202.32 — Lexmark MS811

Code: 202.32

Description: The media reached the sensor (fuser exit) but did not clear it within the specified time
Remedy: Step 1 Check the rear door. Is the rear door free of damage and properly closed? Go to step 2. Close or replace the rear door. See “Rear door removal”.
Step 2 Check the fuser unit assembly for damage and life expiration. Is the above component damaged or has it exceeded life? Replace the fuser. See “Fuser removal”. Go to step 3.
Step 3 Check the sensor (fuser output) for proper operation. a Enter the diagnostic mode. b Select Base sensor tests. c Observe the line item fuser exit. Does the display on the control panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 5. Go to step 4.
Step 4 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the fuser. See “Fuser removal”. Reseat the connection.
Step 5 Check the upper redrive for damage. Is the above component free from damage? Go to step 6. Replace the upper redrive. See “Upper redrive removal”.
Step 6 Perform a print test, and check the upper redrive motor for proper operation. Does the above component operate properly? Go to step 7. Replace the upper redrive motor. See “Upper redrive motor removal”.
Step 7 Perform a print test. Does the problem remain? Contact the next highest level of technical support. Problem solved.

← Xem tất cả mã lỗi Lexmark MS811

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie