Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 31.21...31.45 — Lexmark MS811dn

Code: 31.21...31.45

Description: 31.21 Toner Level Sensing reading out of range 31.22 Excessive toner sensing line noise 31.23 Abrupt change detected in toner sensing reading 31.25 Toner level sensing calibration capacitor reading too low 31.40 Toner cartridge smart chip error 31.41 Toner cartridge I2C packet time-out 31.42 Toner cartridge I2C packet has been sent but code timed-out on receiving the data (callback) 31.43 Toner cartridge security error in the send challenge sequence 31.44 Toner cartridge ROM signature error 31.45 Toner cartridge stuck or busy; status register and/or CRI Arbiter register report busy
Remedy: Step 1 Ensure that the toner cartridge is installed properly. Is the toner cartridge properly installed? Go to step 2. Reinstall the toner cartridge properly. Step 2 Remove the existing toner cartridge and install a different cartridge. Does the error remain? Go to step 3. Problem resolved. Step 3 Ensure the cable for socket "TONER UNIT" on the controller board is properly connected. Is the above cable properly connected? Go to step 4. Reseat the connection or replace the cable. Go to step 4.

← Xem tất cả mã lỗi Lexmark MS811dn

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie