Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 202.03 — Lexmark MS812de

Code: 202.03

Description: The media is late reaching the sensor (fuser exit) within the specified time
Remedy: Step 1 Check the fuser unit assembly for damage and life expiration. Is the above component damaged or has it exceeded life? Replace the fuser. See “Fuser removal”. Go to step 2.
Step 2 Check the fuser unit assembly for obstructions. Is the above component free from obstructions? Go to step 3. Go to step 3.
Step 3 Check the sensor (fuser output) for proper operation. a Enter the diagnostic mode. b Select Base sensor tests. c Observe the line item output. Does the display on the control panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 5. Go to step 4.
Step 4 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the fuser. See “Fuser removal”. Reseat the connection.
Step 5 Check the transfer roller for damage. Is the above component free from damage? Go to step 6. Replace the transfer roller. See “Transfer roller removal”.
Step 6 Check the media aligner roller for damage. Is the above component free from damage? Go to step 7. Replace the media aligner roller. See “Media aligner roller removal”
Step 7 Perform a print test, and check the main motor assembly for proper operation. Is the media properly transported and able to reach the sensor (fuser exit)? Go to step 8. Replace the upper fuser drive motor. See “Fuser drive motor removal”.
Step 8 Perform a print test. Does the problem remain? Contact the next highest level of technical support. Problem solved.

← Xem tất cả mã lỗi Lexmark MS812de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie