Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 193.10 — Lexmark MS911

Code: 193.10

Description: The tray 3 lift plate did not move to the correct position.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > 2 x 500-Sheet Tray Motor Tests > Tray 3 lift Does the motor run? Go to step 5. Go to step 3. Step 3 a Reseat the motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Replace the motor. See gMotor (2 x 500-sheet tray lift) removalh. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Make sure that the tray 3 tray set actuator is properly installed. b Check the actuator for damage, and replace if necessary. g2 x 500.sheet tray tray set actuator removalh. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the sensor (2 x 500-sheet tray 3 lift plate level). Is it free of damage? Go to step 7. Go to step 9. Step 7 Enter the Diagnostics menu, and then navigate to: SENSOR TESTS > 2 x 500-Sheet Tray Sensor Tests > Tray 3 lift plate limit Does the sensor status change while toggling the sensor? Go to step 10. Go to step 8. Step 8 a Reseat the sensor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 9. The problem is solved. Step 9 Replace the sensor (2 x 500-sheet tray 3 lift plate level). See g2 x 500-sheet tray transport assembly sensors removalh. Does the problem remain? Go to step 10. The problem is solved. Step 10 Check the 2 x 500.sheet tray controller board pins for damage, and replace if necessary. See g2 x 500-sheet tray controller board removalh. Does the problem remain? Contact the next level of support. The problem is solved

← Xem tất cả mã lỗi Lexmark MS911

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie