Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 940.xx — Lexmark MX511de

Code: 940.xx

Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed.
Remedy: Step 1 Check if the power supply cable is properly connected to the controller board. Is it properly connected? Go to step 2. Reseat the cables.
Step 2 a Turn off the printer. b Remove the power cord. c Measure the resistance between terminals A and D of the power supply socket. Is the resistance approximately 30 ohms? Contact your next level of support. Replace the power supply. See “Power supply removal”.

← Xem tất cả mã lỗi Lexmark MX511de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie