Code: 35, 36, 37
Description: 35 Res save off deficient memory 37 Insufficient collation area 38 Memory full
Remedy: 1 Disable the Resource save feature: Settings > Print Settings > Setup Menu > Resource Save > Off
Step 1 Check the memory card for proper installation. Is it properly installed? Go to step 2. Reseat the memory card.
Step 2 a Print the Menu settings page: Settings > Reports > Menu Settings Page b POR into the Configuration menu and reset the printer’s settings to factory default: Configuration Menu > Factory Defaults > Restore Base c Remove the memory card. d Restart the printer. Does the error remain? Replace the controller board. See “Controller board removals”. Replace the memory card.
Step 1 Check the memory card for proper installation. Is it properly installed? Go to step 2. Reseat the memory card.
Step 2 a Print the Menu settings page: Settings > Reports > Menu Settings Page b POR into the Configuration menu and reset the printer’s settings to factory default: Configuration Menu > Factory Defaults > Restore Base c Remove the memory card. d Restart the printer. Does the error remain? Replace the controller board. See “Controller board removals”. Replace the memory card.