Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 200.16 — Lexmark MX611

Code: 200.16

Description: Fuser motor stalled.
Remedy: Step 1 a Remove the main drive gearbox. b Check the main drive gearbox cable for proper connection. Is it properly connected? Go to step 2. Reseat the cable.
Step 2 a Remove the main drive gearbox. b Check the gears of main drive gearbox for wear or damage. Are they free of wear or damage? Go to step 3. Replace the main drive gearbox. See “Main drive gearbox removal”.
Step 3 Check the main drive motor for proper operation: a Remove the main drive gearbox. Note: Do not disconnect the main drive gearbox cable. b POR into the Diagnostics menu and perform a feed test: Diagnostics menu > Input Tray Tests > Feed Test > Select any input source c Check if the main drive motor rotates when doing the feed test. Does it rotate when doing the feed test? Go to step 4. Replace the main drive gearbox. See “Main drive gearbox removal”.
Step 4 Check the fuser gear for damage or toner contamination. Is it free of damage and contamination? Replace the controller board. See “Controller board removals”. Replace the fuser. See “Fuser removal”.

← Xem tất cả mã lỗi Lexmark MX611

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie