Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 200.09...200.12 — Lexmark MX710dhe

Code: 200.09...200.12

Description: 200.09 The proper main motor feedback to start laser servo was not received. 200.10 Printhead motor was not locked when page reached the sensor (input). 200.11 Printhead motor fell out of lock after the page reached the sensor (input). 200.12 Printhead was not ready for the page when the sensor (input) was reached.
Remedy: Step 1 Ensure the cables for sockets “MIR MTR” and “VIDEO” on the controller card are properly connected and not damaged. Are the cables connected and undamaged? Go to step 2. Reseat the connections. Go to step 2.
Step 2 Reset the machine. Does the error continue? Replace the printhead. See “Laser printhead removal”. Problem solved.
Step 3 Reset the machine. Does the error continue? Replace the controller board. See “Controller board removal”. Problem solved.

← Xem tất cả mã lỗi Lexmark MX710dhe

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie