Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 282.01 — Lexmark MX711

Code: 282.01

Description: Media remains on the sensor (ADF pick) during the warm-up sequence or at POR.
Remedy: Step 1 Check the media path. Is the media path free of media or media fragments? Go to step 2. Remove any media or media fragments.
Step 2 Check the sensor (ADF 1st scan) for proper operation. 1. Enter the Diagnostics Menu. 2. Touch SCANNER TESTS. 3. Touch Sensor Tests. 4. a Enter the Diagnostics Menu. b Touch SCANNER TESTS. c Touch Sensor Tests. d Observe the line “sensor (ADF pick)”. Does the display on the operator panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 4. Go to step 3.
Step 3 Check the sensor (ADF pick) for proper connection. Is the above component properly connected? Replace the sensor (ADF pick). Go to “Sensor (ADF pick) removal”. Replace the connection
Step 4 Place an undamaged document in the ADF, and perform an ADF test. Does the error remain? Replace the ADF controller PCBA. Problem solved.
Step 5 Perform a print test using the ADF. Does the problem remain? Contact the next highest level of support. Problem solved.

← Xem tất cả mã lỗi Lexmark MX711

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie