Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 843.15, 843.18 — Lexmark MX711

Code: 843.15, 843.18

Description: 843.15 The ADF elevator tray has stalled. 843.18 The ADF elevator tray motor did not turn off at the appropriate time.
Remedy: Step 1 Check the ADF pick roller for proper installation. Remove the ADF pick roller cover, and fully press the ADF pick roller toward the sensor to make sure the mounting latch is properly engaging the slot in the shaft. Does the problem remain? Go to step 2. The problem is solved.
Step 2 Check all connections on the ADF controller board for proper connectivity. Are all of the above connections properly connected? Go to step 3. Replace the connections.

← Xem tất cả mã lỗi Lexmark MX711

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie