Code: 230.28
Description: The sensor (duplex path) rebounded upon being released by the trailing edge of the media
Remedy: Step 1 Check the sensor (duplex path) for proper operation. a Enter the diagnostic mode. b Select duplex tests. c Select sensor test. d Observe the line item sensor. Does the display on the control panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 3. Go to step 2.
Step 2 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (duplex path) See “Sensor (duplex path) removal”. Reseat the connection.
Step 3 Perform a print test. Does the problem remain? Contact the next level of technical support. Problem solved.
Step 2 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (duplex path) See “Sensor (duplex path) removal”. Reseat the connection.
Step 3 Perform a print test. Does the problem remain? Contact the next level of technical support. Problem solved.