Description: Media remains on the sensor (ADF media exit) during the warm-up sequence or at POR.
Remedy: Step 1 Check the media size setup and tray guides for the ADF. Does the media size, in use, match the size set for the ADF Go to step 2. Replace the media, or change the media size setup. Step 2 Check the sensor (ADF media exit) for proper operation. a Enter the Diagnostics Menu. b Touch SCANNER TESTS. c Touch Sensor Tests. d Observe the line "sensor (ADF media exit)." Does the display on the operator panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 4. Go to step 3.