Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 284.01 — Lexmark MX711dhe

Code: 284.01

Description: Media remains on the sensor (ADF 2nd scan) during the warm-up sequence or at POR.
Remedy: Step 1 Check the media size setup and tray guides for the ADF. Does the media size, in use, match the size set for the ADF Go to step 2. Replace the media, or change the media size setup. Step 2 Check the sensor (ADF 2nd scan) for proper operation. a Enter the Diagnostics Menu. b Touch SCANNER TESTS. c Touch Sensor Tests. d Observe the line "sensor (ADF 2nd scan)." Does the display on the operator panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 4. Go to step 3. Step 3 Check the sensor (ADF 2nd scan) for proper connection. Is the above component properly connected? Replace the sensor (ADF 2nd scan). Go to “Interrupt with flag sensor (ADF 2nd scan) removal”. Replace the connection. Step 4 Place an undamaged document in the ADF, and perform a ADF test. Does the error remain? Replace the ADF controller PCBA. Problem solved. Step 5 Perform a print test using the ADF. Does the problem remain? Contact the next highest level of support. Problem solved.

← Xem tất cả mã lỗi Lexmark MX711dhe

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie