Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 843.07 — Lexmark MX810de

Code: 843.07

Description: The ADF elevator tray home position is not detected by the sensor (ADF elevator tray home position).
Remedy: Step 1 Check all connections on the ADF controller board for proper connectivity. Are all of the above connections properly connected? Go to step 2. Replace the connections. Step 2 Check the sensor (ADF elevator tray home position) for damage or detachment. Is the above sensor properly attached or free from damage? Go to step 3. Reattach or replace the ADF rear side drive parts pack. Step 3 Check the sensor (ADF elevator tray home position) for proper operation. a Enter the Diagnostics Menu. b Touch SCANNER TESTS. c Touch Sensor Tests. d See the line item “sensor (ADF elevator tray home position).” Does the display on the operator panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 4. Reattach or replace the ADF rear side drive parts pack. Step 4 Check the ADF elevator tray drive motor for proper operation. a Enter the Diagnostics Menu. b Touch motor TESTS. c Touch elevator tray home position. d Perform test. Does the motor operate properly. Go to step 5. Replace the ADF rear side drive parts kit. Step 5 Place an undamaged document on the ADF elevator tray and perform an ADF scanner test. Does the problem remain? Replace the ADF controller board. See “ADF controller card removal”. Problem resolved. Step 6 Place an undamaged document on the ADF elevator tray and perform a scanner test. Does the problem remain? Replace the controller board. See “Controller board removal”. Problem resolved.

← Xem tất cả mã lỗi Lexmark MX810de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie