Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 133.01, 133.03, 133.04 — Lexmark MX910

Code: 133.01, 133.03, 133.04

Description: 133.01 The toner density is above normal. 133.03 The sensor (toner density) malfunctioned. 133.04 The sensor (toner density) did not perform the correct adjustments.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: Reset Image Stabilization > Restore factory toner density Does the problem remain? Go to step 3. The problem is solved. Step 3 Enter the Configuration menu, and then navigate to: Automatic Image Stabilization > Auto Align Adj Make sure that the value is set to On. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Make sure that the developer is properly installed. b Make sure that the developer is supported. Does the problem remain? Go to step 5. The problem is solved.

← Xem tất cả mã lỗi Lexmark MX910

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie