Code: 800.23, 800.7, 809.01, 809.02
Description: 800.23 A timing error occurred during a scan job at the back side of the document. 800.7 The image data was not detected. 809.01 The scanner controller board communication failed. 809.02 The scanner controller board communication failed.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Note: Do this step every time a service error would occur to clear the error and restore the engine settings. Does the error remain? Go to step 2. The problem is solved. Step 2 a Reseat all of the cables on the scanner controller board and reseat the cable connectors on the other end of the connection. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the scanner controller board for damaged pins, and replace if necessary. See “Scanner controller board removal”. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the engine controller board for damaged pins, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.