Code: 111.01, 111.06
Description: 111.01 The printhead motor malfunctioned. 111.06 The printhead laser malfunctioned.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 a Make sure that the printhead FFC is properly connected. b Check the FFC for damage, and replace if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Polygon Does the motor run? Go to step 5. Go to step 4. Step 4 a Make sure that the printhead is properly installed. b Check the printhead for damage, and replace if necessary. See “Printhead removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the printhead relay board pins for damage, and replace if necessary. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.