Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 121.86 — Lexmark MX910de

Code: 121.86

Description: Contamination was detected at the sensor (fuser temperature).
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the environment for humidity. Remove or reduce sources of humidity if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 a Make sure that the sensor (fuser temperature) is free from dust. b Check the sensor for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Make sure that the sensor (registration humidity) is free from dust. b Check the sensor for damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Observe the paper exit fan. Is it working properly? Go to step 7. Go to step 6. Step 6 a Make sure that the paper exit fan cable is properly connected. b Check the paper exit fan for damage, and replace if necessary. See “Paper exit fan removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 a Make sure that the fuser is properly installed. b Make sure that the fuser cable is properly connected. c Check the fuser for damage, and replace if necessary. See “Fuser removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 Check the induction heater. Is it working properly? Go to step 10. Go to step 9. Step 9 a Make sure that the induction heater cable is properly connected. b Check the induction heater for damage, and replace if necessary. See “Induction heater removal”. Does the problem remain? Go to step 10. The problem is solved. Step 10 a Make sure that the induction heater power supply is properly installed. b Check the induction heater power supply cable connections, and reseat if necessary. Does the problem remain? Go to step 11. The problem is solved. Step 11 Check the engine controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark MX910de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie