Code: 189.01...189.64
Description: 189.01 The expansion controller board communication failed. 189.61 The staple, hole punch finisher communication failed. 189.61 The staple finisher communication failed. 189.63 The horizontal paper transport communication failed. 189.64 The hole punch booklet finisher communication failed.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Make sure that the interface cable is properly connected to the finisher and to the expansion controller board. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the expansion controller board pins for damage, and replace if necessary. See “Expansion controller board removal”. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.