Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 196.10 — Lexmark MX910de

Code: 196.10

Description: The 2500-sheet tray lift plate did not move to the correct position.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset engine Service Error Note: Do this step every time a service error would occur to clear the error and restore the engine settings. Does the error remain? Go to step 2. The problem is solved. Step 2 a Make sure that the motor (2500-sheet tray elevator) is properly installed. b Enter the Diagnostics menu, and then navigate to: Motor Tests > 2500-Sheet Tray Motor Tests > Elevator Test c Observe if the motor is working properly. Note: Remove tray 1 and tray 2 to observe the motor movement properly. Does the motor run? Go to step 6. Go to step 3. Step 3 a Reseat the 2500-sheet tray elevator motor cable on both sides. b Check the motor cable for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Check the coupling for wear or damage, and replace if necessary. b Check the motor gears, rollers, and belts for wear or damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Replace the motor (2500-sheet tray elevator). See gMotor (2500.sheet tray elevator) removalh. Does the problem remain? Go to step 6. The problem is solved. Step 6 a Make sure that the actuators of the sensor (tray elevator home) and sensor (main tray elevator limit) are properly installed and aligned. b Check the actuators for damage, and replace if necessary. Does the problem remain? Go to step 7. The problem is solved.

← Xem tất cả mã lỗi Lexmark MX910de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie