Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 600.00...600.10 — Lexmark MX910de

Code: 600.00...600.10

Description: 600.00 The image was not ready during a print job from the MPF. 600.01 The image was not ready during a print job from tray 1. 600.02 The image was not ready during a print job from tray 2. 600.03 The image was not ready during a print job from tray 3. 600.04 The image was not ready during a print job from tray 4. 600.05 The image was not ready during a print job from tray 5. 600.10 The image was not ready during a duplex print job.
Remedy: Step 1 Make sure that the Page description language (PDL) of the print job is supported. Install the supporting option card if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: PRINT TESTS > Tray 1 Does the problem remain? Go to step 3. The problem is solved. Step 3 a Make sure that the printhead and board cables are properly connected. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Make sure that the printhead is properly installed. b Check the printhead for damage, and replace if necessary. See “Printhead removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark MX910de

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie