Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 167.04 — Lexmark MX911

Code: 167.04

Description: The motor (2500-sheet tray transport) did not reach the required speed.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset engine Service Error Note: Do this step every time a service error would occur to clear the error and restore the engine settings. Does the error remain? Go to step 2. The problem is solved. Step 2 a Check the 2500-sheet tray feed and transport motor belt for proper tension, and adjust if necessary. b Check the 2500-sheet tray feed and transport motor gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the 2500-sheet tray transport rollers for damage, and replace if necessary. See g2500.sheet tray transport roller removalh. Note: If the page count is over 50K, then clean the rollers. Does the problem remain? Go to step 4. The problem is solved. Step 4 Replace the motor (2500-sheet tray transport). See gMotor (2500.sheet tray transport) removalh. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the 2500-sheet tray controller board pins for damage, and replace if necessary. See g2500-sheet tray controller board removalh. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark MX911

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie