Code: 911.72, 911.225
Description: 911.72 Finisher abnormality was detected when controlling the exit roller pressure. 911.225 Finisher abnormality was detected when driving the motors.
Remedy: Step 1 a Reset the printer. b Make sure that the cables are properly connected to the option controller board and controller board. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the engine controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the option controller board pins for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Make sure that the firmware version is the latest. Does the problem remain? Contact the next level of support. The problem is solved