Description: The motor (developer) did not run at the correct timing.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Developing tray Does the motor run? Go to step 6. Go to step 3. Step 3 a Reseat the developer motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Check the developer belt for proper tension, and adjust if necessary. b Check the developer gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved.