Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 190.10 — Lexmark MX911dte

Code: 190.10

Description: The elevator plate did not move to the correct position.
Remedy: Step 1 a Make sure that the tray is properly installed and aligned to the printer. b Reseat the interface cable that is plugged into the 2500. or 2 x 500.sheet tray. c Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > 3000.Sheet Tray Motor Test > Tray elevator Does the motor run? Go to step 4. Go to step 3. Step 3 a Make sure that the motor (3000-sheet tray elevator) is properly installed. b Reseat the cable on the motor and the cable CN3 on the controller board. c Check the motor for damage, and replace if necessary. See gMotor (3000-sheet tray elevator) removalh. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Reseat the cable on all of the sensors. b Reseat the cable CN5 on the controller board. c If necessary, reseat all of the junction connectors on the cables. d Make sure that the cables do not block the path of moving parts. e Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Reseat the cable on the rest of the motors and on the top door switch. b Reseat the cables CN3 and CN4 on the controller board. c If necessary, reseat all of the junction connectors on the cables. d Make sure that the cables do not block the path of moving parts. e Check the cables for damage, and replace if necessary. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark MX911dte

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie