Code: 800.25
Description: The CCD power supply malfunctioned.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Note: Do this step every time a service error would occur to clear the error and restore the engine settings. Does the error remain? Go to step 2. The problem is solved. Step 2 a Reseat all of the cables on the scanner controller board and engine controller board. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 a Reseat the scanner CCD cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the scanner CCD lens assembly for proper installation and damage, and replace if necessary. See “Scanner CCD lens assembly removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the scanner controller board for damaged pins, and replace if necessary. See “Scanner controller board removal”. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the engine controller board for damaged pins, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.