Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 200.16...200.99 — Lexmark MX912

Code: 200.16...200.99

Description: 200.16 The sensor (registration) did not detect the paper fed from tray 1. 200.19 While feeding from tray 1, skew correction did not complete at the registration roller. 200.91 The paper remains detected at the sensor (registration) after the printer is turned on. 200.92 Paper size error was detected. 200.93 While feeding from tray 2, tray 3 or tray 4, skew correction did not complete at the registration roller. 200.99 The sensor (registration) did not detect the paper fed from tray 2, tray 3, tray 4, or tray 5.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: EVENT LOG > Display Log Do most of the recent error codes end with a 1? (Example: 241.11, 200.91) Go to step 2. Go to step 8. Step 2 Make sure that the registration paper path, including the sensors, are free of debris or dust. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the registration sensor actuator for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the sensor (registration). Is it free of damage? Go to step 5. Go to step 7. Step 5 Enter the Diagnostics menu, and then navigate to: SENSOR TESTS > PRINTER SENSOR TESTS > Registration Does the sensor status change while toggling the sensor? Go to step 8. Go to step 6. Step 6 a Reseat the registration sensor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the sensor (registration). Does the problem remain? Go to step 8. The problem is solved. Step 8 Enter the Diagnostics menu, and then navigate to: INPUT TRAY TESTS > Feed Tests > Tray 1 Does the leading edge of the paper reach the sensor (registration)? Go to step 10. Go to step 9. Step 9 Check the tray 2 transport roller for damage, and replace if necessary. Does the problem remain? Go to step 10. The problem is solved. Step 10 Check the registration roller for wear or damage, and replace if necessary. Does the problem remain? Go to step 11. The problem is solved. Step 11 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Registration Does the motor run? Go to step 15. Go to step 12. Step 12 a Reseat the registration motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 13. The problem is solved. Step 13 a Check the registration belt for proper tension, and adjust if necessary. b Check the registration gear and belt for wear or damage, and replace if necessary. See “Registration unit belt removal” and “Registration unit gears removal”. Does the problem remain? Go to step 14. The problem is solved. Step 14 Replace the motor (registration). See “Motor (registration) removal”. Does the problem remain? Go to step 15. The problem is solved. Step 15 a Check the feed belts for proper tension, and adjust if necessary. b Check the feed gears and belts for wear or damage, and replace if necessary. Does the problem remain? Go to step 16. The problem is solved. Step 16 Is tray 1 the paper source? Go to step 18. Go to step 17. Step 17 a Check the tray 2 transport drive belt for proper tension, and adjust if necessary. b Check the tray 2 transport drive gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 18. The problem is solved. Step 18 a Make sure that the paper feed drive assembly is properly installed. b Make sure that the assembly is clear of obstructions. c Check the assembly for damage, and replace if necessary. See “Feed drive assembly removal”. Does the problem remain? Go to step 19. The problem is solved. Step 19 a Make sure that the registration transport assembly is properly installed. b Make sure that the assembly is clear of obstructions. c Check the assembly for damage, and replace if necessary. See “Registration transport assembly”. Does the problem remain? Go to step 20. The problem is solved. Step 20 Make sure that the blue screws and marked screws in the paper path area are tightened. Does the problem remain? Go to step 21. The problem is solved. Step 21 Check the expansion controller board pins for damage, and replace if necessary. See “Expansion controller board removal”. Does the problem remain? Go to step 22. The problem is solved. Step 22 Check the engine controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved

← Xem tất cả mã lỗi Lexmark MX912

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie