Code: 600.00...600.10
Description: 600.00 The image was not ready during a print job from the MPF. 600.01 The image was not ready during a print job from tray 1. 600.02 The image was not ready during a print job from tray 2. 600.03 The image was not ready during a print job from tray 3. 600.04 The image was not ready during a print job from tray 4. 600.05 The image was not ready during a print job from tray 5. 600.10 The image was not ready during a duplex print job.
Remedy: Step 1 Make sure that the Page description language (PDL) of the print job is supported. Install the supporting option card if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: PRINT TESTS > Tray 1 Does the problem remain? Go to step 3. The problem is solved. Step 3 a Make sure that the printhead and board cables are properly connected. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 a Make sure that the printhead is properly installed. b Check the printhead for damage, and replace if necessary. See “Printhead removal”. Does the problem remain? Contact the next level of support. The problem is solved.