Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 685.xx — Lexmark MX912

Code: 685.xx

Description: Original document size mismatch detected at the ADF.
Remedy: Step 1 Make sure that the scanner paper size setting matches the source tray paper size setting Does the problem remain? Go to step 2. The problem is solved. Step 2 Make sure that there is no document on the flatbed scanner when copying from the ADF. Does the problem remain? Go to step 3. The problem is solved. Step 3 Enter the Configuration menu, and then select SIZE SENSING. a Make sure that Tray Sensing is set to Auto for the 500-sheet trays. b Make sure that the paper size settings for 2500-sheet tray and 3000- sheet tray matches the supported paper size of the source tray. c Make sure that the correct paper size is set. The printer can only detect one paper size at a time for the following: • Oficio/Folio Sensing • Statement/A5 Sensing • Executive/B5 Sensing Does the problem remain? Go to step 4. The problem is solved. Step 4 a Enter the Diagnostics menu, and then navigate to: SCANNER TESTS > Sensor Test b Manually toggle the following sensors: • Sensor (ADF paper width) • Sensor (ADF paper length 1) • Sensor (ADF paper length 2) Does the sensor status change while toggling the sensors? Go to step 7. Go to step 5. Step 5 a Reseat the sensor cables. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the sensors for dStep 7 Check the paper width and paper length sensors of the source tray for damage, and replace if necessary. Does the problem remain? Go to step 8. The problem is solved. Step 8 a Make sure that the source tray is properly installed. b Make sure that the paper path is clear of debris or dust. c Make sure that the tray length and width guides are working properly. d Check the tray insert for damage, and replace if necessary. Does the problem remain? Contact the next level of support. The problem is solved.amage, and replace if necessary. See “Sensors (ADF tray section) removal”. Does the problem remain? Go to step 7. The problem is solved.

← Xem tất cả mã lỗi Lexmark MX912

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie