Description: The tray 4 lift plate did not move to the correct position.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > 2 x 500-Sheet Tray Motor Tests > Tray 4 lift Does the motor run? Go to step 5. Go to step 3. Step 3 a Reseat the motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved.