Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 992 — Lexmark Optra C710

Code: 992

Description: High Voltage Leakage. The high voltage leakage detection circuit has detected leakage in the high voltage system. • This symptom may require replacement of one or more customer replaceable units, designated as supplies or maintenance items, which are the responsibility of the customer. With the customer’s permission, if available, try new print cartridges. • Before proceeding with this service check, turn the printer off, wait a few minutes and turn the printer back on. If the error remains, proceed with the remainder of this service check.
Remedy: 1 Print Cartridge Open the cartridge cover and remove the cartridge in the top position of the carriage assembly. Try a new cartridge and the printer again. Verify that a 992 error check continues to display, for the cartridge replaced. • If it is not the same cartridge, try a new cartridge for each time the 992 error code displays, until you find the failing cartridge. • If the new cartridge still fails, continue to the next step. 2 HVPS Grid Block 1 Grid Block 2 Remove the HVPS from the printer. Reinstall the HVPS verifying the HVPS board touches all the appropriate contacts on grid blocks 1 and 2, and is mounted securely. • If a 992 error displays, remove the HVPS and check the contacts on grid blocks 1 and 2 for any signs of pitting, bending, deformed contacts, or contamination. Repair or replace parts as necessary. • If the source of the problem cannot be isolated, replace the following FRU's in the following order given: 1. HVPS 2. Grid block 1 3. Grid block 2

← Xem tất cả mã lỗi Lexmark Optra C710

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie